Polished Brass Z-Series Square Type Radius Base Zinc Clamp for 1/2″ Glass – C.R. Laurence

Description

CRL Z612BR Polished Brass Z-Series Square Radius Base Zinc Clamp for 1/2″ Glass

C.R. Laurence Z612BR Polished Brass Z-Series Square Type Radius Base Zinc Clamp for 1/2″ Glass is expertly designed for secure and reliable glass installation in various applications, including mezzanines, partitions, railings, and windbreaks. This clamp accommodates 1/2″ (12 mm) thick glass, making it an ideal choice for both residential and commercial projects.Constructed from durable zinc with a stunning polished brass finish, this clamp not only provides strength but also enhances the aesthetic appeal of your glass installations. For additional glass support, a steel pin is included, which requires a 9/16″ (14 mm) diameter hole when used with 1/2″ glass. Rubber gaskets ensure a snug fit, while replacement gaskets can be easily ordered using catalog number Z12SG. Installation is straightforward; utilize CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut for securing to thin wall tubing. Designed for compatibility with 2″ (51 mm) diameter round tubing, the clamp’s radius base design facilitates a seamless integration into your architectural vision. With custom painted finishes available upon request, the C.R. Laurence Z612BR clamp offers both functionality and elegance, making it a top choice for discerning builders and homeowners alike.

Polished Brass Z-Series Square Type Radius Base Zinc Clamp for 1/2″ Glass

• For 1/2″ (12 mm) Glass
• Replacement Gaskets are Available by Ordering Cat. No. Z712SG
• For Use on Mezzanines, Partitions, Railings and Windbreaks
• Use Monolithic Tempered Glass
• Steel Pin Available for Additional Glass Support
• Custom Painted Finishes Available Upon Request

This
CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 1/2″ (12 mm) Glass. Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For securing the Z-Clamp to thin wall tubing (less than 1/8″), use CRL’s
ZB0LT Socket Head Cap Bolt and
ZRNUT Rivet-Nut. For installation, drill a 17/32″ (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16″ Mandrel and Nosepiece.

NOTE: 1/2″ (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS:

Glass Thicknesses: For 1/2″ (12 mm) Glass.

Base Design: Radius.

For Use With: 2″ (51 mm) Diameter Round Tubing only.

Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.

Glass Fabrication:

For 1/4″ (6 mm), 5/16″ (8 mm), and 3/8″ (10 mm) Thick Glass: 1/2″ (12 mm) diameter hole required if using provided steel pin for glass support.

For 1/2″ (12 mm) Thick Glass: 9/16″ (14 mm) diameter hole required if using provided steel pin for glass support.

Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet.

Replacement Hardware: CRL ZCS5X5BR for Replacement Screws

Product Warning:

For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.