Mechanical CVR Concealed Vertical Rod Exit Device – 36in RHR Right Hand Reverse – 628 Aluminum Painted

Description

Command PD16-CVR-36-628 RHR CVR Concealed Vertical Rod Exit Device, 36in, RHR Right Hand, 628 Aluminum

Command Access PD16-CVR-36-628 RHR Mechanical (CVR) Concealed Vertical Rod Exit Device offers a robust solution for securing commercial and institutional buildings. Designed for right-hand reverse installations, this 36-inch exit device features a sleek aluminum painted finish that complements narrow-style doors perfectly.Built for reliability, the PD16-CVR is equipped with motorized latch retraction for quick and quiet operation, ensuring safe and efficient egress. The device includes innovative PTS technology, allowing for easy electronic adjustments post-installation-ideal for adapting to various door heights. With a low current draw, it is compatible with most 24VDC power supplies, making it convenient for centralized installations. The PD16-CVR maintains factory dogging, with options for standard hex key or electric dogging, enhancing versatility and user control. Its durable design accommodates standard 1-3/4″ door thickness and fits minimum 2″ stile widths, making it adaptable to various architectural applications. Additionally, it features top and bottom steel rods that facilitate easy adjustment. Supported by a generous 3-year “no hassle” warranty, the Command Access PD16-CVR is a reliable choice for professionals seeking quality and performance in exit devices. This unit not only meets but exceeds the high standards of grade 1 products, ensuring peace of mind for both installers and building occupants.

Mechanical (CVR) Concealed Vertical Rod Exit Device, 36in, RHR Right Hand Reverse, 628 Aluminum Painted

Notice: The info below is not item specific.

The PD15-M series is a motorized latch pullback grade 1 storefront exit device; made for use in all institutions and commercial buildings storefront applications. All PD15-M models are equipped with our PTS “push to set” technology. As a retrofit for the Jackson 128-5/95 & Kawneer 168-6/1786 series models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door. Install this device with the confidence of knowing that the PD15-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle” warranty, meaning we will support you.

Features:

• Our motorized latch retraction is fast, quiet, and smooth!
• MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• “PTS”: 1 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty – Auto re-engage if pulled from the dogged position
• Low current draw: Compatible with most 24VDC, 1.5A (or greater) regulated & linear power supplies
• Up to 300’ with 2-18ga — long wire runs with provides installer with convenience of placing the locking device power supply in a centralized location; i.e. the same closet as the access panel
• 8″ cable with Quick connect for MM4 module to easily connect to power supply lead
• The slim, compact attractive low profile design enables mounting on narrow-style doors.
• Maintains factory dogging
• 3-year “no hassle” warranty – longer than the traditional 1 year warranty because our stuff works!
• Retrofits the Jackson 128-5/95 & Kawneer 168-6/1786 series exit devices
• Motorized latch retraction w/ easy adjustment
• Long wire runs w/18ga – no need for specialty power supply right above the door.

Models:

• PD15-M-RIM: Complete rim device, non-handed, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• PD15-M-CVR: Complete CVR device, specify handing – LHR or RHR, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• Sub PD16: for mechanical devices

Specifications:

• System protection: unit shutdown when voltage exceeds 28VDC
• Standard: Average current peak: 900mA, average current hold: 250mA
• PTS adjustment: approx. 1/4″
• 300’ Run w/ 18ga
• Handing: Rim device is non-handed. CVR device is handed.
• Door Thickness: Suits 1-3/4″ standard
• Projection: 2-5/8″ when fully projected, 1-5/8″when dogged.
• Stile Width: Minimum 2″ stile. Fits narrow, medium, and wide stile aluminum doors.
• Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
• Fasteners: Standard self-tapping screws
• Vertical Rods: Top and bottom steel rods for easy adjustment. Standard device is adjustable for nominal door heights
• Push bar Length: Standard size: dimensioned for 36″ and 48″ openings. Standard width bars can be field cut to: 3-6/48″ – 7″ of filler plate needed

Accessories:

• Request to Exit (REX): Switch available factory installed
• Request to Exit Kit (PD15REXKIT-M-ED): Switch available for installation in the field

Attributes

Alternate Codes: CMAPD16-CVR-36-628-RHR, CMAPD16-CVR-36-ALUM-RHR, PD16-CVR-36-628 RHR, PD16-CVR-36-628-RHR, PD16CVR36628RHR

Category: Commercial Electric Locks, CVR Panic Devices, Electric Locks, Glass Aluminum Hardware, Lock Sets, Narrow Style Electric Locks, Narrow Style Panic Devices, Panic Devices, Panic Devices & Exit Alarms, Standalone/Pushbutton Locks

Browse Similar Items