KIT – RX Request to Exit, MEL Motorized Electric Latch Retraction, Fire Rated Exit Device

Description

Falcon Lock RX-MEL-F24C-EO-US26D-48X96 RX Request to Exit, MEL Motorized Electric Latch, Fire Rated, Satin Chrome

Falcon Lock RX-MEL-F24C-EO-US26D-48X96 KIT offers a sophisticated solution for exit control in multifamily and commercial environments. This motorized electric latch retraction (MEL) system ensures energy-efficient electronic control of exit devices, facilitating seamless egress while maintaining optimal security. Designed for fire-rated applications, this exit device features a concealed vertical rod design that not only enhances aesthetics but also provides robust protection with two-point latching. The RX-MEL-F24C is compatible with credential readers, allowing authorized users to unlock doors momentarily or keep them accessible for extended periods. Its modular design simplifies installation, making it easy to retrofit existing Falcon 24 or 25 series devices. With built-in diagnostics and a self-calibrating motor assembly, installation and troubleshooting are straightforward. This exit device is designed for 1-3/4″ thick metal doors and is finished in a sleek satin chrome (US26D). It operates on a 24VDC power supply, requiring only 1 Amp of current. The vandal-resistant features ensure that the device can withstand tampering attempts, making it ideal for high-traffic areas. Choose the Falcon Lock RX-MEL-F24C-EO-US26D-48X96 KIT for a reliable, efficient, and secure exit solution tailored to modern architectural needs.

KIT – RX Request to Exit, MEL Motorized Electric Latch Retraction, Fire Rated, CVR Concealed Vertical Rod Exit Device, Exit Only, No Trim, 48in x 96in, 4188 and 2130 Strikes, 24VDC1 Amp, Grade 1, 626/US26D Satin Chrome

Notice: The info below is not item specific.

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction. The MEL option is available on panic and fire rated devices. Because fire exit hardware must be self latching, an automatic fire alarm system must be incorporated to drop power to fire rated MEL devices in case of fire. The F-24-C series device lets you combine the safety of a fire-rated device with the clean aesthetics that come with a narrow stile and concealed vertical rod installation. In-field adjustment is simple thanks to our patented center slide mechanism. Two-point latching ensures optimal security at the door.

Features:

• MEL option available on 24 and 25 series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

MEL System Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 series power supplies – PS902, 904, 906, 914; 900 Series Option Boards – 900-2RS, 900-4R and 900-4RL.
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately

Functions:

• EO (01): Exit only, no trim.
• DT (02): Entrance by trim when actuating bar is locked down. Note: Fire exit devices cannot be dogged down. Some codes permit electric dogging with fail secure circuitry.
• NL (03): Entrance by trim when latchbolt is retracted by key. Key removable only when locked.
• L or K (08): Entrance by knob or lever. Key locks or unlocks knob.
• L (NL) or K (NL) (09): Entrance by knob or lever only when released by key. Key removable only when locked.

Lever Designs:

• Avalon (AVA): Projection 3-1⁄4″
• Quantum (QUA): Projection 3-1⁄4″
• Dane (DAN): Projection 3″
• Broadway (BRW): Projection 3-1⁄5″
• Boardwalk (BRK): Projection 3-1⁄5″
• Danish (DSH): Projection 2-9⁄10″
• Latitude (LAT): Projection 3-1⁄10″
• Longitude (LON): Projection 3-1⁄10″
• Sutro (SUT): Projection 3-1⁄4″

Specifications:

• Hand: Field reversible.
• Strikes: 4188 mortised top, 2130 flush strike bottom.
• Latchbolt: Top stainless steel, 3⁄4″ throw. Bottom bolt 1⁄2″ throw.
• Latch retention hold: Standard with top latch.
• Deadlocking latchbolt: Standard with top latch.
• Doors: 1-3⁄4″ thick metal. Specify if other than 1-3⁄4″ thick. For wood doors, specify as F-24-C-WDC.
• Projections: 2-3⁄4″ maximum.
• Stile: 3-5⁄8″ minimum when used in pairs. (6″ minimum on wood doors).
• Electric functions: Can be interfaced with building security systems. Motorized electric latch retraction (fail secure only), security monitoring, delayed egress and exit alarm available.
• Fasteners: All mounting screws are concealed. All machine screws standard.
• Sex bolts: Required when used with wood, composite or non-reinforced hollow metal doors. For EO device specify 2 – 425 (# 10-24) SNB and 2 – 325 (1⁄4″ -20) SNB. For devices with trim, specify 2 – 425 (# 10-24) SNB.
• F-24-C-LBR: Less bottom rod concealed vertical device. Auxiliary fire pin required per pair. “A” Label (3 hr) – 8’ x 8’ 90 min. same egress – 8’ x 8’
• Vertical rods: Furnished to length based on 40″ horizontal CL to finished floor and a 7’ 0″ door. Variations from these standards must be specified when ordering.
• Patented center slide: For ease of adjustment.

Stock Sizes:

Device	Door Size	Door Strike	Min Door Opening Width (Add 3.5″ to standard)
MEL-24-R	3′	299	2′ 11″
MEL-24-R	3’	264	2′ 10 7⁄8″
MEL-24-R	3’	1439	2′ 10 1⁄4″
MEL-24-R	3’	1606	2′ 10 5⁄8″
MEL-24-R	4′	299	3′ 5″
MEL-24-R	4′	264	3′ 4 7⁄8″
MEL-24-R	4′	1439	3′ 4 1⁄4″
MEL-24-R	4′	1606	3′ 4 5⁄8″
MEL-24-C	3’	All	2′ 10 5⁄8″
MEL-24-C	4’	All	3′ 4 5⁄8″
MEL-24-V	3’	All	2′ 10 5⁄8″
MEL-24-V	4’	All	3′ 4 5⁄8″
MEL-25-R	3’	299	2′ 11″
MEL-25-R	3’	264	2′ 10 7⁄8″
MEL-25-R	3’	1439	2′ 10 1⁄4″
MEL-25-R	3’	1606	2′ 10 5⁄8″
MEL-25-R	4’	299	3′ 5″
MEL-25-R	4’	264	3′ 4 7⁄8″
MEL-25-R	4’	1439	3′ 4 1⁄4″
MEL-25-R	4’	1606	3′ 4 5⁄8″
MEL-25-C	3′	All	2′ 10 5⁄8″
MEL-25-C	4’	All	3′ 4 5⁄8″
MEL-25-V	3’	All	2′ 10 5⁄8″
MEL-25-V	4’	All	3′ 4 5⁄8″

Finishes:

• US3/605 – Bright brass
• US4/606 – Satin brass
• US10/612 – Satin bronze
• US11/643e – Aged bronze
• US15/619 – Satin nickel
• US19/622 – Matte black
• US26/625 – Bright chrome
• US26D/626 – Satin chrome
• US28/628 – Anodized aluminum
• US32/629 – Bright stainless steel
• US32D/630 – Satin stainless steel
• 313AN/710 – Anodized duranodic

Attributes

Ship via: No UPS – Common Carrier Only

Alternate Codes: FALRX-MEL-F24C-EO-US26D-48, RX-MEL-F24C-EO-US26D-48, RXMELF24CEOUS26D48

Category: Electrified Panic Devices, Panic Devices & Exit Alarms

Shipping Limitations: Some products exceed standard small package size regulations and may incur additional fees. Items measuring 84″ or more could require extra charges or LTL shipping. Please keep this in mind when ordering, and contact customer service for more details.

Browse Similar Items