KIT – Motorized Electric Latch Retraction Fire Rated SVR Surface Vertical Rod Exit Device with Quantum Lever Trim 510L

Description

Falcon Lock MEL-F25V-L-QUA-US26D-48X96-RHR Motorized Electric Latch Retraction Exit Device, SVR, Quantum Lever Trim 510L

Falcon Lock MEL-F25V-L-QUA-US26D-48X96-RHR KIT offers a robust solution for secure access control with its Motorized Electric Latch Retraction (MEL) feature. This fire-rated SVR Surface Vertical Rod Exit Device is ideal for multifamily and commercial properties, providing a cost-effective option for electromechanical latch retraction. The MEL system enables efficient electronic control of the exit device while ensuring mechanical egress at all times. Designed with a satin chrome finish, this exit device requires a 1-1/4 mortise cylinder and is compatible with Falcon’s 24 and 25 Series devices, enhancing flexibility for various installations. Its energy-efficient motor allows for longer wire runs and can be powered by standard Schlage power supplies, making installation straightforward and hassle-free. The device features a self-calibrating motor assembly and incorporates on-board diagnostics for easy troubleshooting. Vandal resistance is built-in to detect and respond to tampering attempts. For optimal performance, a power transfer device, such as an electrified hinge or door loop, is required and sold separately. Whether integrating with credential readers or utilizing security monitoring systems, the Falcon Lock MEL-F25V-L-QUA-US26D-48X96-RHR KIT stands out as a reliable choice for modern security solutions.

KIT – Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, RHR Right Hand Reverse/Reversible, UL, 24VDC1 Amp, Grade 1, 626/US26D Satin Chrome

Notice: The info below is not item specific.

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies – PS902, 904, 906, 914; 900 Series Option Boards – 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Device	Door Size	Door Strike	Min Door Opening Width (Add 3.5″ to standard)
MEL-24-R	3′	299	2′ 11″
MEL-24-R	3’	264	2′ 10 7⁄8″
MEL-24-R	3’	1439	2′ 10 1⁄4″
MEL-24-R	3’	1606	2′ 10 5⁄8″
MEL-24-R	4′	299	3′ 5″
MEL-24-R	4′	264	3′ 4 7⁄8″
MEL-24-R	4′	1439	3′ 4 1⁄4″
MEL-24-R	4′	1606	3′ 4 5⁄8″
MEL-24-C	3’	All	2′ 10 5⁄8″
MEL-24-C	4’	All	3′ 4 5⁄8″
MEL-24-V	3’	All	2′ 10 5⁄8″
MEL-24-V	4’	All	3′ 4 5⁄8″
MEL-25-R	3’	299	2′ 11″
MEL-25-R	3’	264	2′ 10 7⁄8″
MEL-25-R	3’	1439	2′ 10 1⁄4″
MEL-25-R	3’	1606	2′ 10 5⁄8″
MEL-25-R	4’	299	3′ 5″
MEL-25-R	4’	264	3′ 4 7⁄8″
MEL-25-R	4’	1439	3′ 4 1⁄4″
MEL-25-R	4’	1606	3′ 4 5⁄8″
MEL-25-C	3′	All	2′ 10 5⁄8″
MEL-25-C	4’	All	3′ 4 5⁄8″
MEL-25-V	3’	All	2′ 10 5⁄8″
MEL-25-V	4’	All	3′ 4 5⁄8″

Finishes:

• 605/US3 – Brass, Bright
• 606/US4 – Brass, Satin
• 613/US10B – Bronze, Oil Rubbed
• 619/US15 – Nickel, Satin
• 622/US19 – Black, Matte
• 625/US26 – Chromium, Bright
• 626/US26D – Chromium, Satin
• 629/US32 – Satinless Steel, Bright
• 630/US32D – Satinless Steel, Satin
• 643e/US11 – Bronze, Aged

Attributes

Ship via: No UPS – Common Carrier Only

Alternate Codes: FALMELK-F25V-L-QUA-US26D-48X96-RHR, MEL-F25V-L-QUA-US26D-48X96-RHR, MELF25VLQUAUS26D48X96RHR, MELK-F25V-L-QUA-US26D-48X96-RHR, MELKF25VLQUAUS26D48X96RHR

Category: Electrified Panic Devices, Panic Devices & Exit Alarms

Shipping Limitations: Some products exceed standard small package size regulations and may incur additional fees. Items measuring 84″ or more could require extra charges or LTL shipping. Please keep this in mind when ordering, and contact customer service for more details.

Browse Similar Items