Description
CRL PT2034PS DORMAKABA Polished Stainless Top Door Patch Fitting for 3/4″ Glass
C.R. Laurence PT2034PS DORMAKABA Polished Stainless Top Door Patch Fitting with Pivot Insert For 3/4″ Glass is designed for seamless integration in modern glass door systems. This top patch fitting is compatible with 3/4″ (19 mm) monolithic tempered glass, ensuring durability and strength in high-traffic environments. The polished stainless steel finish adds a sleek, contemporary look, while the 304 alloy construction guarantees resistance to corrosion, making it a reliable choice for both commercial and residential applications. The PT2034PS features a 2-3/4″ (70 mm) pivot setback, allowing for smooth operation and easy installation in the upper corner of your glass panel. This product supports doors with a maximum height of 102″ (2.59 m), a maximum width of 42″ (1.09 m), and a weight limit of 194 lbs. (88 kg). For doors exceeding these limits, full door rails are recommended.Included with the fitting are a template and instructions to facilitate precise glass fabrication, requiring a 3/4″ (19 mm) diameter hole and a corner notch. While stainless steel is resistant to corrosion, periodic maintenance is advised to preserve its factory finish. Elevate your architectural designs with the reliability and elegance of C.R. Laurence’s top patch fitting.
DORMAKABA Polished Stainless Top Door Patch Fitting with Pivot Insert For 3/4″ Glass
- For 3/4″ (19 mm) Glass
- Use Monolithic Tempered Glass
- 304 Alloy Stainless Steel Covers
- 2-3/4″ (70 mm) Pivot Setback
DORMAKABA® Top Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the glass panel, and requires a hole and cut-out in the glass. Available in brushed and polished stainless steel finishes.
The following guidelines are to be used when making a door using this hardware:
Maximum Height: 102″ (2.59 m)
Maximum Weight: 194 lbs. (88 kg)
Maximum Width: 42″ (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
GLASS FABRICATION REQUIRED:
One 3/4″ (19 mm) Diameter
Hole and Corner Notch
COMES WITH:
Template and Instructions
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm – www.p65warnings.ca.gov
Finish/ Color:: Polished Stainless Steel
Glazing Thickness: 3/4 in. (19 mm)
Insert Type: 1NT303
Pivot Setback: 2-3/4
Series: DORMAKABA®
Shipping Limitations: None
Type: Top
With Insert: Yes
Resources
- CRL Stainless Steel Disclaimer
- Commercial Patch Hardware European Series System CAD Drawings.dwg
- Commercial Patch Hardware European Series System CAD Drawings.pdf
- Commercial Patch Hardware North American Series System CAD Drawings.dwg
- Commercial Patch Hardware North American Series System CAD Drawings.pdf
- Commercial Patch Hardware Wedge Lock 3-8 inch Glass to 1-2 inch Glass System CAD Drawings.dwg
- Commercial Patch Hardware Wedge Lock 3-8 inch Glass to 1-2 inch Glass System CAD Drawings.pdf
- Commercial Patch Hardware Wedge Lock 5-8 inch Glass to 3-4 inch Glass System CAD Drawings.dwg
- Commercial Patch Hardware Wedge Lock 5-8 inch Glass to 3-4 inch Glass System CAD Drawings.pdf
- DORMAKABA PT10 20 22 30 34 Glass Fabrication Detail Template
- Template PT10 20 22 30 34 Cut Templates.pdf
Reviews
There are no reviews yet.